MIDSIZE CARRIER FOR MASSIVE JOBS
MIDSIZE CARRIER FOR MASSIVE JOBS
Compact enough non-permitted load when transporting, but still featuring an 18,000 lb. carrying capacity, the RT9U is ready to streamline utility transmission and distribution.
Extended front and rear frame extensions and multiple hydraulic configurations allow you to customize the RT9U nearly any way you need.
Advantageous Size
Largest carrier in its class allowing it to accommodate over-sized support equipment.
Ease of Transport
Haul the unit from jobsite to jobsite on a tag trailer without special permits.
Cummins Engine
Carrier delivers maximum power and torque for traversing rugged terrain with ease while at maximum capacity.
Make your job even easier with a wide range of attachments.
From Alaska and the Yukon to the tip of Florida, our vast dealer network has you covered anywhere in the U.S. and Canada.
| Full Length | 24’ | 7.3 m |
| Full Height | 9’ 11" | 3.0 m |
| Width Over Tracks | 8’ 3" | 2.5 m |
| Track Gauge (Center-to-Center) | 6' | 1.8 m |
| Min Ground Clearance | 21” | 0.5 m |
| Track Width | 27.5” | 0.7 m |
| Undercarriage Length (Idler to Drive Hub) | 12' 3" | 3.7 m |
| Rail Width | 3.3' | 1.0 m |
| Rear of Cab to Rear of Rail* | 13.9' | 4.2 m |
| Front Rail Extension** | 3.9' | 1.2 m |
| Manufacturer | Cummins | Cummins |
| Model | QSB 6.7 | QSB 6.7 T4F |
| Emissions Certifications | T4F | |
| Displacement | 408 cu. in. | 6.7 L |
| Horsepower | 255 HP @ 2200 RPM | 168 kW |
| Electrical System | 12 VDC | 12 VDC |
| Battery | (2) GRP 31, 1125 CCA | (2) GRP 31, 1125 CCA |
| Fuel Capacity | 64 gallons | 242 L |
| Transmission | HST | HST |
| Drive Pump Max Flow (x2) | 43 gpm / side | 163 L/m |
| Drive Pump Max Pressure | 5,500 PSI | 379 bar |
| Tandem Gear Pump Max Flow | ||
| Front Section (AUX Output) | 25 gpm @ 3000 PSI | 95 L/m @ 206 bar |
| Rear Section (HST Drive) | 22 gpm @ 550 PSI | 83 L/m @ 38 bar |
| Optional Pump Drive | 25 gpm @ 2500 PSI | 95 L/m @ 172 bar |
| Base Weight | 20,668 lbs. | 9,375 kg |
| Max. Carrying Capacity | 23,512 lbs. | 10,665 kg |
| GVWR | 44,180 lbs. | 20,040 kg |
| Travel Speed - 1st Gear | 3.6 mph | 5.8 kph |
| Travel Speed - 2nd Gear | 6.6 mph | 10.6 kph |
| Maximum Gradability | 58% (30°) | 1 rad |
| Turning Radius | Zero Turn | Zero Turn |
| Ground Pressure (Loaded) | 6.4 PSI | .45 kg/c2 |
| Ground Pressure (Unloaded) | 3.0 PSI | .21 kg/c2 |
As part of our commitment to quality and reliability, Terramac provides a limited warranty:
The Terramac Carrier Limited Warranty extends until the sooner of (a) twenty-four (24) months or (b) until the Terramac Carrier’s electronic control module (“ECM”) exceeds 1000 hours (henceforth known as the “Limited Warranty Period”).
Registration of Terramac Limited Warranty is required within 6 months of invoice date or upon the machines ECM reaching 50 hours, whichever comes first. Failure to do so will cause machine warranty to default back to the date of invoice to the original purchaser. (See warranty registration form). The Terramac Carrier Limited Warranty terminates upon the expiration of the Limited Warranty Period.
Terramac warrants that it will replace, at its sole option and discretion, any original parts of any Terramac Carrier sold by it that are deemed to be defective in material or workmanship, with the exception of parts and components identified in Section IV “Pass-through Warranties” and Section V “Exclusions from Limited Warranty”. All warranty repairs or replacements will be free of charge and must be performed by an authorized Terramac dealer or approved vendor. Repaired or replaced parts are covered only for the remainder of the Limited Warranty Period.
To view the complete Terramac warranty download it here.
* The overall length may vary depending on utility build model selected.
** Frame length can be modified, please contact Terramac for details.
Copyright © 2021 All rights reserved
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
