MEET YOUR JOB SITE NINJA
MEET YOUR JOB SITE NINJA
With its compact size and 360° rotation, the RT7R can get in and out of remote job sites with anyone hardly noticing – even on the most challenging of terrain.
The RT7R’s rotation keeps operators in a forward-facing position at all times for enhanced safety while allowing the operator to offload at nearly any angle for added efficiency.
360° of Freedom
Offload with precision in the most sensitive and confined job sites with complete 360° rotation.
14,000 lb. Carrying Capacity
Move 7 tons of material or equipment at a time without disturbing sensitive environments.
Non-Permitted Load
Transporting your RT7R requires no oversize load permits. Just load it onto a standard flatbed trailer and head to your next job.
Make your job even easier with a wide range of attachments.
From Alaska and the Yukon to the tip of Florida, our vast dealer network has you covered anywhere in the U.S. and Canada.
Full Length/WITH Rock Bed | 17’ 3" | 5.3 m |
Full Height | 9’ 9" | 3 m |
Width Over Tracks | 8’ 1" | 2.5 m |
Track Gauge (Center-to-Center) | 5’ 9" | 1.8 m |
Min Ground Clearance | 20" | 0.5 m |
Front Overhang | 2’ 10" | 0.9 m |
Track Width | 27.5" | 0.7 m |
Undercarriage Length (Idler to Drive Hub) | 9’ 11" | 3 m |
Dump Bed Loading Height Over Side | 6’ 5" | 2 m |
Height of Dump Bed Side (Vessel) | 22" | .6 m |
Length of Dump Bed (Vessel) | 8’ 8" | 2.6 m |
Width of Dump Bed (Vessel) | 6’ 8" | 2 m |
Dumping Angle | 60° | 1 rad |
Machine Weight (with bed) | 23,730 lbs. | 10,764 kg |
Manufacturer | Cummins | Cummins |
Model | B4.5 Performance Series | B4.5 Performance Series |
Emissions Certifications | US Tier 4 Final/EU Stage V | US Tier 4 Final/EU Stage V |
Displacement | 275 cu. in. | 4.5 L |
Horsepower | 165 HP @ 2200 RPM | 123 kW |
Electrical System | 12 VDC | 12 VDC |
Battery | (2) GRP 31, 1100 CCA | (2) GRP 31, 1100 CCA |
Fuel Capacity | 40 gallons | 151 L |
Transmission | HST | HST |
Drive Pump Max Flow (x2) | 32 gpm / side | 121 L/m |
Drive Pump Max Pressure | 5,500 PSI | 379 bar |
Tandem Gear Pump Max Flow | ||
Front Section (AUX Output) | 14 gpm @ 2500 PSI | 53 L/m @ 172 bar |
Rear Section (HST Drive) | 20 gpm @ 380 PSI | 76 L/m @ 26 bar |
Max. Carrying Capacity | 14,000 lbs. | 6,350 kg |
Travel Speed - 1st Gear | 3.3 mph | 5.3 kph |
Travel Speed - 2nd Gear | 6.7 mph | 10.5 kph |
Maximum Gradability | 58% (30°) | 58% (.52 rad) |
Turning Radius | Zero Turn | Zero Turn |
Ground Pressure (Loaded) | 5.5 PSI | .39 kg/c2 |
Ground Pressure (Unloaded) | 3.5 PSI | .25 kg/c2 |
As part of our commitment to quality and reliability, Terramac provides a limited warranty:
The Terramac Carrier Limited Warranty extends until the sooner of (a) twenty-four (24) months or (b) until the Terramac Carrier’s electronic control module (“ECM”) exceeds 1000 hours (henceforth known as the “Limited Warranty Period”).
Registration of Terramac Limited Warranty is required within 6 months of invoice date or upon the machines ECM reaching 50 hours, whichever comes first. Failure to do so will cause machine warranty to default back to the date of invoice to the original purchaser. (See warranty registration form). The Terramac Carrier Limited Warranty terminates upon the expiration of the Limited Warranty Period.
Terramac warrants that it will replace, at its sole option and discretion, any original parts of any Terramac Carrier sold by it that are deemed to be defective in material or workmanship, with the exception of parts and components identified in Section IV “Pass-through Warranties” and Section V “Exclusions from Limited Warranty”. All warranty repairs or replacements will be free of charge and must be performed by an authorized Terramac dealer or approved vendor. Repaired or replaced parts are covered only for the remainder of the Limited Warranty Period.
To view the complete Terramac warranty download it here.
Copyright © 2021 All rights reserved
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.