RT7

Small Footprint, Big Hustle

Small Footprint, Big Hustle

Don’t let the size fool you. The RT7 delivers 14,000 lbs. of carrying capacity while fitting into the tight spaces other machines can’t step foot

Keep your crew productive from the first load to the last. Equipped with low ground pressure rubber tracks, this carrier maximizes daily hauls while protecting sensitive terrain. Plus, its optimized dimensions allow for effortless transport between jobsites without the need for costly oversized permits, keeping your downtime to a minimum.

14,000 lb. Carrying Capacity

Moving 7 tons of material per load provides hefty hauling in the toughest of terrain.

Serviceability, Simplified

Ground-level access to fluids, filters and daily checkpoints maximizing uptime.

Simple Customization

Transport equipment and tools to the most remote areas to keep projects moving.

Dealer Locations Map

Wherever You Work, There we are.

From Alaska and the Yukon to the tip of Florida, our vast dealer network has you covered anywhere in the U.S. and Canada.

Full Length 16' 10" 5.1 m
Full Height 9' 6" 2.9 m
Width Over Tracks 8' 2" 2.5 m
Min. Ground Clearance 18" 0.5 m
Front Overhang 4' 4" 1.3 m
Track Gauge (Center-to-Center) 6' 2" 1.9 m
Track Width 23.6" 0.6 m
Undercarriage Length (Idler to Drive Hub) 10' 3.0 m
Dump Bed Loading Height Over Side 4' 11" 1.5 m
Height of Dump Bed Side (Vessel) 14" 0.4 m
Length of Dump Bed (Vessel) 9' 2" 2.8 m
Width of Dump Bed (Vessel) 7' 7" 2.3 m
Dumping Angle 60° 1 rad
Machine Weight (with bed) 18,540 lbs. 8,410 kg
Manufacturer Cummins Cummins
Model B4.5 Performance Series B4.5 Performance Series
Emissions Certifications US Tier 4 Final/EU Stage V US Tier 4 Final/EU Stage V
Displacement 275 cu. in. 4.5 L
Horsepower 155 HP @ 2200 RPM 116 kW @ 2200 RPM
Electrical System 12 VDC 12 VDC
Battery (2) GRP 31, 1000 CCA (2) GRP 31, 1000 CCA
Fuel Capacity 40 gallons 151 L
Tansmission HST HST
Drive Pump Max Flow (x2) 32 gpm / side 121L/m / side
Drive Pump Max Pressure 5,500 PSI 379 bar
Tandem Gear Pump Max Flow
Front Section (Aux Output) 14 gpm @ 2500 PSI 53 L/m @ 207 bar
Rear Section (HST Drive) 20 gpm @ 380 PSI 76 L/m @ 38 bar
Max. Carrying Capacity 14,000 lbs. 6,350 kg
Travel Speed - 1st Gear 3.3 mph 6.3 khp
Travel Speed - 2nd Gear 6.7 mph 10.5 khp
Gradability (loaded/unloaded) 27% (15°) / 58% (30°) 27% (.5 rad) / 58% (1 rad)
Turning Radius Zero Turn Zero Turn
Ground Pressure (loaded) 6.2 PSI .38 kg/c2
Ground Pressure (unloaded) 3.6 PSI .18 kg/c2

As part of our commitment to quality and reliability, Terramac provides a limited warranty:

The Terramac Carrier Limited Warranty extends until the sooner of (a) twenty-four (24) months or (b) until the Terramac Carrier’s electronic control module (“ECM”) exceeds 1000 hours (henceforth known as the “Limited Warranty Period”).

Registration of Terramac Limited Warranty is required within 6 months of invoice date or upon the machines ECM reaching 50 hours, whichever comes first. Failure to do so will cause machine warranty to default back to the date of invoice to the original purchaser. (See warranty registration form). The Terramac Carrier Limited Warranty terminates upon the expiration of the Limited Warranty Period.

Terramac warrants that it will replace, at its sole option and discretion, any original parts of any Terramac Carrier sold by it that are deemed to be defective in material or workmanship, with the exception of parts and components identified in Section IV “Pass-through Warranties” and Section V “Exclusions from Limited Warranty”. All warranty repairs or replacements will be free of charge and must be performed by an authorized Terramac dealer or approved vendor. Repaired or replaced parts are covered only for the remainder of the Limited Warranty Period.

To view the complete Terramac warranty download it here.

Log in

RT7

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.